ELECTROFORMING
ELECTROFORMING
ELECTROFORMING
Electroforming is a technique that has been used by TOUS for more than 20 years, the result of a large investment into innovative new technologies. It allows for the creation of larger, lightweight, quality pieces without the need for soldering. Through a chemical electrolysis process, the particles of precious metal are deposited on a base, which is removed once the piece of jewelry is finished. Only 18 kt gold (750/000 gold) and sterling silver (925/000 silver) is used to create designs from 180 microns thick for gold and 300 microns for silver.
Electroforming is a technique that has been used by TOUS for more than 20 years, the result of a large investment into innovative new technologies. It allows for the creation of larger, lightweight, quality pieces without the need for soldering. Through a chemical electrolysis process, the particles of precious metal are deposited on a base, which is removed once the piece of jewelry is finished. Only 18 kt gold (750/000 gold) and sterling silver (925/000 silver) is used to create designs from 180 microns thick for gold and 300 microns for silver.
Electroforming is a technique that has been used by TOUS for more than 20 years, the result of a large investment into innovative new technologies. It allows for the creation of larger, lightweight, quality pieces without the need for soldering. Through a chemical electrolysis process, the particles of precious metal are deposited on a base, which is removed once the piece of jewelry is finished. Only 18 kt gold (750/000 gold) and sterling silver (925/000 silver) is used to create designs from 180 microns thick for gold and 300 microns for silver.
CASTING
CASTING
CASTING
Casting is the most frequently used method in TOUS’ workshops and in the jewelry industry in general. A liquid wax is injected into a rubber mold and, once cold, is covered with plaster. Then, the plaster cast is placed in a centrifuge where metal, usually gold or silver, is injected to replace the wax, creating the desired piece of jewelry.
Casting is the most frequently used method in TOUS’ workshops and in the jewelry industry in general. A liquid wax is injected into a rubber mold and, once cold, is covered with plaster. Then, the plaster cast is placed in a centrifuge where metal, usually gold or silver, is injected to replace the wax, creating the desired piece of jewelry.
Casting is the most frequently used method in TOUS’ workshops and in the jewelry industry in general. A liquid wax is injected into a rubber mold and, once cold, is covered with plaster. Then, the plaster cast is placed in a centrifuge where metal, usually gold or silver, is injected to replace the wax, creating the desired piece of jewelry.
SINTERING
SINTERING
SINTERING
The sintering process allows the production of pieces with complex geometries. It consists of a laser that melts thin layers of metal powder to create a digitally designed figure. The program divides the 3D model into layers and a moving arm places a thin layer of atomized metal powder on a platform, while a laser melts the areas where the 3D model indicates that a part of the piece should be. The arm then passes through again to deposit another layer of powder, and so on until the final piece is created. This technique is limited by the metal. Only gold, titanium and platinum can be sintered. Collections like Real Sissy and some of the Teddy Bear bears have been created using the sintering process.
The sintering process allows the production of pieces with complex geometries. It consists of a laser that melts thin layers of metal powder to create a digitally designed figure. The program divides the 3D model into layers and a moving arm places a thin layer of atomized metal powder on a platform, while a laser melts the areas where the 3D model indicates that a part of the piece should be. The arm then passes through again to deposit another layer of powder, and so on until the final piece is created. This technique is limited by the metal. Only gold, titanium and platinum can be sintered. Collections like Real Sissy and some of the Teddy Bear bears have been created using the sintering process.
The sintering process allows the production of pieces with complex geometries. It consists of a laser that melts thin layers of metal powder to create a digitally designed figure. The program divides the 3D model into layers and a moving arm places a thin layer of atomized metal powder on a platform, while a laser melts the areas where the 3D model indicates that a part of the piece should be. The arm then passes through again to deposit another layer of powder, and so on until the final piece is created. This technique is limited by the metal. Only gold, titanium and platinum can be sintered. Collections like Real Sissy and some of the Teddy Bear bears have been created using the sintering process.
MACHINING
MACHINING
MACHINING
There is a multitude of different machining processes and techniques that enable jewellery to be made quickly and easily, although they always require a skilled artisan for the perfect finish.
There is a multitude of different machining processes and techniques that enable jewellery to be made quickly and easily, although they always require a skilled artisan for the perfect finish.
There is a multitude of different machining processes and techniques that enable jewellery to be made quickly and easily, although they always require a skilled artisan for the perfect finish.
1. STAMPING
1. STAMPING
1. STAMPING
This is one of the most-used techniques at TOUS. It consists of applying pressure to thin sheets of metal using dies marked with the desired design or shape. This is how the pieces in the Nenúfar collection were created.
This is one of the most-used techniques at TOUS. It consists of applying pressure to thin sheets of metal using dies marked with the desired design or shape. This is how the pieces in the Nenúfar collection were created.
This is one of the most-used techniques at TOUS. It consists of applying pressure to thin sheets of metal using dies marked with the desired design or shape. This is how the pieces in the Nenúfar collection were created.
2. NUMERICAL CONTROL MILLING MACHINE
2. NUMERICAL CONTROL MILLING MACHINE
2. NUMERICAL CONTROL MILLING MACHINE
Sometimes, there are volumetric pieces that cannot be produced by stamping because of their geometry. In cases such as these, we use the numerical control milling machine, which sculpts the part in two dimensions from a metal plate. The Camille collection is an example of pieces created using the CNC (Computer Numerical Control) process.
Sometimes, there are volumetric pieces that cannot be produced by stamping because of their geometry. In cases such as these, we use the numerical control milling machine, which sculpts the part in two dimensions from a metal plate. The Camille collection is an example of pieces created using the CNC (Computer Numerical Control) process.
Sometimes, there are volumetric pieces that cannot be produced by stamping because of their geometry. In cases such as these, we use the numerical control milling machine, which sculpts the part in two dimensions from a metal plate. The Camille collection is an example of pieces created using the CNC (Computer Numerical Control) process.
3. WATERJET AND LASER CUTTING
3. WATERJET AND LASER CUTTING
3. WATERJET AND LASER CUTTING
To cut out shapes in thin sheets, waterjet and laser cutting techniques are used. While one uses a pressurised jet of water for cutting, the other is cut directly with a laser. These are common processes in our collections, such as the gold Minne and the Sketch Line bear.
To cut out shapes in thin sheets, waterjet and laser cutting techniques are used. While one uses a pressurised jet of water for cutting, the other is cut directly with a laser. These are common processes in our collections, such as the gold Minne and the Sketch Line bear.
To cut out shapes in thin sheets, waterjet and laser cutting techniques are used. While one uses a pressurised jet of water for cutting, the other is cut directly with a laser. These are common processes in our collections, such as the gold Minne and the Sketch Line bear.
ATELIER TOUS
ATELIER TOUS
ATELIER TOUS
"UNIQUE HAND-MADE JEWELRY"
Atelier was born from Rosa Oriol’s feeling and passion for craftsmanship and special jewelry. Her work, in which the most genuine inspiration arises spontaneously, creates original and unique pieces, full of color and hand-made by our master jewelers.
Atelier was born from Rosa Oriol’s feeling and passion for craftsmanship and special jewelry. Her work, in which the most genuine inspiration arises spontaneously, creates original and unique pieces, full of color and hand-made by our master jewelers.
"UNIQUE HAND-MADE JEWELRY"
Atelier was born from Rosa Oriol’s feeling and passion for craftsmanship and special jewelry. Her work, in which the most genuine inspiration arises spontaneously, creates original and unique pieces, full of color and hand-made by our master jewelers.
Atelier was born from Rosa Oriol’s feeling and passion for craftsmanship and special jewelry. Her work, in which the most genuine inspiration arises spontaneously, creates original and unique pieces, full of color and hand-made by our master jewelers.
"UNIQUE HAND-MADE JEWELRY"
Atelier was born from Rosa Oriol’s feeling and passion for craftsmanship and special jewelry. Her work, in which the most genuine inspiration arises spontaneously, creates original and unique pieces, full of color and hand-made by our master jewelers.
Atelier was born from Rosa Oriol’s feeling and passion for craftsmanship and special jewelry. Her work, in which the most genuine inspiration arises spontaneously, creates original and unique pieces, full of color and hand-made by our master jewelers.
Discover more
Discover more
Discover more
